Monday, June 28, 2010
Sr. Memory Design Engineer (DRAM / DDR):
A growing company in the Austin, TX area is looking for candidates nationwide willing to relocate to the Austin, TX area. Once again, the position is in Austin. This person will participate in cross functional teams to develop new High Speed Memory ICs; perform digital, mixed signal, analog design and simulation; and simulate modules and full-chip environments. This person will interface with and support: architects, product and test engineering, CAD, layout, applications, technology development, marketing, development systems, manufacturing and other design engineers.
For consideration, please send your resume to Paul Montoya at pmontoya@kforce.com today!
Senior IC Design Engineer Qualifications:
* BSEE or equivalent (required)
* MSEE (preferred)
* Experience doing circuit design for the DRAM side of DDR interfaces is required
* Someone who has done circuit design right around the pads
* High Speed Memory Design experience is required
* Experience in digital design and project management skills (required)
* Analog and Mixed signal design (required)
* Transistor-level design experience (required)
* Memory design experience (required) such as SRAM, ROM, EEPROM, Flash, MRAM, DRAM, etc.
* Strong communication skills (required)
For consideration, please send your resume to Paul Montoya at pmontoya@kforce.com today!
Senior IC Design Engineer Qualifications:
* BSEE or equivalent (required)
* MSEE (preferred)
* Experience doing circuit design for the DRAM side of DDR interfaces is required
* Someone who has done circuit design right around the pads
* High Speed Memory Design experience is required
* Experience in digital design and project management skills (required)
* Analog and Mixed signal design (required)
* Transistor-level design experience (required)
* Memory design experience (required) such as SRAM, ROM, EEPROM, Flash, MRAM, DRAM, etc.
* Strong communication skills (required)
Design Engineer (Structural Steel)
Multi-national manufacturer of industrial products seeks a Design Engineer for it's facility located in the Upstate (Greenville / Spartanburg) of South Carolina.
Job duties include, but are not limited to:
-Design prototypes / products to customer requests
-Perform structural analysis of fabricated assemblies
-Manage designs / drawings
Qualifications / keywords include a bachelor's degree in mechanical engineering with at least five years mechanical design experience with demonstrated proficiency in SolidWorks, FEA, and structural analysis.
Interested persons may respond directly with a Word document resume to charliechampagne@mergisgroup.com .
Please include a daytime phone number.
Job duties include, but are not limited to:
-Design prototypes / products to customer requests
-Perform structural analysis of fabricated assemblies
-Manage designs / drawings
Qualifications / keywords include a bachelor's degree in mechanical engineering with at least five years mechanical design experience with demonstrated proficiency in SolidWorks, FEA, and structural analysis.
Interested persons may respond directly with a Word document resume to charliechampagne@mergisgroup.com .
Please include a daytime phone number.
Construction Technician- Requisition 58343606 Salt Lake City UT (Temporary)
Tuned In To You
When you're on top of the entertainment and communications business, it stands to reason that you're always in the midst of what's new and exciting and what's on the horizon.
As one of the nation's leading providers of entertainment, information and communication products and services - Comcast now connects more than 24 million people nationwide to cable, digital telephone service, the Internet and some of television's most popular programming on channels that include E! Entertainment Television, Style Network, Golf Channel, VERSUS, G4, PBS KIDS Sprout, TV One and more.
Join us and be part of a growing family of nearly 100,000 people with their eyes on the futurepeople who want to work alongside the best of the best, people who believe that different perspectives and backgrounds, as well as innovation and growth opportunity, should be all in a day's work. See why it's more exciting to be part of the company customers look to first for the products and services that are important to their lives.
POSITION SUMMARY:
Performs Perform construction and contractor QC of underground and/or aerial construction duties in construction of system plant.
Perform construction and contractor QC of new aerial plant including placement of strand, coax cable, splicing, activation, rough balance, and signal leakage detection and repair.
Perform construction and contractor QC installation of coax cables in open trench, including placement of conduit, pedestal, and drop cable.
Perform contractor QC on main and distribution line passive and active devices, including amplifiers; hybrid splitters; directional couplers, power combiners; and taps.
Perform contractor QC on Installation of distribution cable in conduit and ducts according to system design.
Spot and QC the Installation of 60-90 volt standby power supply according to system specs.
Able to locate and mark existing underground cables with use of cable locator
Calculates signal losses of cables, active and passive devices.
Knowledgeable in the area of system layout and strand mapping, with the ability to read and understand system maps concerning construction and repair.
Climb poles, ladders, and other structures as needed. Lifts and carries loads up to 70 lbs.; uses bucket truck when required.
Functions in various weather conditions within safety constraints.
Able to clearly communicate with builders, homeowners and contractors to insure proper system construction specs are followed.
Verify and audit all contractor associated invoicing.
Track and maintain any necessary information needed to monitor contractor productivity. Monitor contractor activities on various construction sites. Keep supervisor informed on all project progress.
Ability to work flexible hours including Saturdays
Familiar with fiber optic restoration and splicing procedures
Punctual, regular, and consistent attendance.
Required Skills:
Education:
High school diploma or GED equivalent with basic knowledge and aptitude in electronics.
EXPERIENCE:
Prior experience in pole climbing techniques and knowledge of safety standards.
Valid driver's license
Satisfactory driving record.
SCTE or NCTI or equivalent training and certification a plus.
Two years experience with CATV coaxial and fiber optic cable construction and splicing experience.
Ability to work overtime, as needed.
When you're on top of the entertainment and communications business, it stands to reason that you're always in the midst of what's new and exciting and what's on the horizon.
As one of the nation's leading providers of entertainment, information and communication products and services - Comcast now connects more than 24 million people nationwide to cable, digital telephone service, the Internet and some of television's most popular programming on channels that include E! Entertainment Television, Style Network, Golf Channel, VERSUS, G4, PBS KIDS Sprout, TV One and more.
Join us and be part of a growing family of nearly 100,000 people with their eyes on the futurepeople who want to work alongside the best of the best, people who believe that different perspectives and backgrounds, as well as innovation and growth opportunity, should be all in a day's work. See why it's more exciting to be part of the company customers look to first for the products and services that are important to their lives.
POSITION SUMMARY:
Performs Perform construction and contractor QC of underground and/or aerial construction duties in construction of system plant.
Perform construction and contractor QC of new aerial plant including placement of strand, coax cable, splicing, activation, rough balance, and signal leakage detection and repair.
Perform construction and contractor QC installation of coax cables in open trench, including placement of conduit, pedestal, and drop cable.
Perform contractor QC on main and distribution line passive and active devices, including amplifiers; hybrid splitters; directional couplers, power combiners; and taps.
Perform contractor QC on Installation of distribution cable in conduit and ducts according to system design.
Spot and QC the Installation of 60-90 volt standby power supply according to system specs.
Able to locate and mark existing underground cables with use of cable locator
Calculates signal losses of cables, active and passive devices.
Knowledgeable in the area of system layout and strand mapping, with the ability to read and understand system maps concerning construction and repair.
Climb poles, ladders, and other structures as needed. Lifts and carries loads up to 70 lbs.; uses bucket truck when required.
Functions in various weather conditions within safety constraints.
Able to clearly communicate with builders, homeowners and contractors to insure proper system construction specs are followed.
Verify and audit all contractor associated invoicing.
Track and maintain any necessary information needed to monitor contractor productivity. Monitor contractor activities on various construction sites. Keep supervisor informed on all project progress.
Ability to work flexible hours including Saturdays
Familiar with fiber optic restoration and splicing procedures
Punctual, regular, and consistent attendance.
Required Skills:
Education:
High school diploma or GED equivalent with basic knowledge and aptitude in electronics.
EXPERIENCE:
Prior experience in pole climbing techniques and knowledge of safety standards.
Valid driver's license
Satisfactory driving record.
SCTE or NCTI or equivalent training and certification a plus.
Two years experience with CATV coaxial and fiber optic cable construction and splicing experience.
Ability to work overtime, as needed.
Business Development Representative
Business Development Representative
Hitech C Systems Inc - North York, ON
The Skinny: We are looking for motivated, aggressive and reliable marketing persons for the opportunity of a lifetime to market Nortel and Cisco Unified Communication ...
Hitech C Systems Inc - North York, ON
The Skinny: We are looking for motivated, aggressive and reliable marketing persons for the opportunity of a lifetime to market Nortel and Cisco Unified Communication ...
Subscribe to:
Posts (Atom)